Curriculum Lattes ORCID SciProfiles Scopus Web of Science substationworm LFFreitasGutierres

📝 Tasks

[!WARNING] When using specialized search engines or Google dorks to identify Internet-exposed OT devices, do not interact with or attempt to access any real systems. The tasks in this document are strictly educational, observational, and non-intrusive, and must fully comply with ethical and legal standards.

  • 1️⃣ Verify the IP address of the otlab-student workstation.
  • 2️⃣ Determine the subnet range of the network where the otlab-student workstation is deployed.
  • 3️⃣ Discover the IP address, MAC address, and vendor information of other active hosts within the network.
    • Hint: One of the devices is an automatic tank gauge (ATG) controller.
  • 4️⃣ Identify open ports and available services on the OT-ICS host over both TCP and UDP protocols.
  • 5️⃣ Retrieve additional system information using vendor-specific nmap scripts.
  • 6️⃣ Identify the total number of publicly accessible OT-ICS devices using the same open port as gas_station through a specialized search engine such as Shodan or FOFA.
  • 7️⃣ Determine the total number of publicly exposed OT-ICS devices that implement the same ATG-related functionality as the gas_station host by querying a specialized search engine such as Shodan or FOFA.

🛠️ Tools

  • The following tools are available on the otlab-student workstation for completing OTLab 3: ifconfig, masscan, netdiscover, and nmap.

🔖 Nomenclature

  • ATG: Automatic tank gauge.
  • ICS: Industrial control system.
  • IP: Internet protocol.
  • MAC: Media access control.
  • OT: Operational technology.
  • TCP: Transmission control protocol.
  • UDP: User datagram protocol.
📝 RESOLUTION (view content) ▼

      
#!/bin/bash

lab_name="OTLab03"
compose_file="${lab_name}.yml"

ot_container_name="gas-station"
ews_container_name="otlab-student"
kali_image="kalilinux/kali-rolling"
ubuntu_image="ubuntu:22.04"

lab_net="gas-station-net"

# ----------------------------------------
# Function to display the banner
show_banner() {                       
    printf "\033[1;33m" # Yellow and bold
    echo " _____ _____ __        _   "
    echo "|     |_   _|  |   ___| |_ "
    echo "|  |  | | | |  |__| .'| . |"
    echo "|_____| |_| |_____|__,|___|"
    printf "\033[1;37m" # White and bold
    printf "Exercise:  03-Emulation of a Gas Station Control System\n"
    printf "Version:   1.1\n"
    printf "Author:    substationworm\n"
    printf "Contact:   in/lffreitas-gutierres\n"
    printf "\033[0m" # Reset all styles
    echo ""
}

# ----------------------------------------
# Function to generate Docker Compose file
generate_compose_file() {
    local ews_image="$1"

    cat > "$compose_file" <<EOF
services:
  $ot_container_name:
    image: honeynet/conpot:latest
    container_name: $ot_container_name
    hostname: $ot_container_name
    mac_address: 00:A0:F6:12:B0:FF
    networks:
      $lab_net:
        ipv4_address: 10.1.0.23
    cap_add:
      - NET_ADMIN
      - NET_RAW
    privileged: true
    command: ["/home/conpot/.local/bin/conpot", "-f", "--template", "guardian_ast"]

  $ews_container_name:
    image: $ews_image
    container_name: $ews_container_name
    hostname: $ews_container_name
    environment:
      - DEBIAN_FRONTEND=noninteractive
    command: >
      bash -c "apt update &&
      apt install -y python2 git ca-certificates iputils-ping nmap masscan tshark net-tools netdiscover snmp wget &&
      [ -d /opt/plcscan ] || git clone https://github.com/meeas/plcscan.git /opt/plcscan &&
      [ -f /usr/share/nmap/scripts/atg-info.nse ] || \
      wget -q -O /usr/share/nmap/scripts/atg-info.nse https://raw.githubusercontent.com/sjhilt/Nmap-NSEs/master/atg-info.nse &&
      nmap --script-updatedb &&
      tail -f /dev/null"
    networks:
      $lab_net:
        ipv4_address: 10.1.0.14
    privileged: true

networks:
  $lab_net:
    name: $lab_net
    driver: bridge
    ipam:
      config:
        - subnet: 10.1.0.0/24
EOF
}

# ----------------------------------------
# System requirements check
check_requirements() {
    error_flag=0

    if ! command -v docker >/dev/null 2>&1; then
        printf "\033[31m[Error]\033[0m Docker is not installed on this system.\n"
        error_flag=1
    elif ! docker info >/dev/null 2>&1; then
        printf "\033[31m[Error]\033[0m Docker is installed, but not accessible.\n"
        error_flag=1
    fi

    if command -v docker-compose >/dev/null 2>&1; then
        DOCKER_COMPOSE_CMD="docker-compose"
    elif docker compose version >/dev/null 2>&1; then
        DOCKER_COMPOSE_CMD="docker compose"
    else
        printf "\033[31m[Error]\033[0m Docker Compose is not installed.\n"
        error_flag=1
    fi

    if [ "$error_flag" -eq 1 ]; then
        printf "\033[31m✘ The $lab_name system requirements check failed.\033[0m\n"
        exit 1
    fi
}

# ----------------------------------------
# Function to check if a container exists
container_exists() {
    docker ps -a --format '{{.Names}}' | grep -q "$1"
}

# ----------------------------------------
# Command handling
case "$1" in
    -start)
        show_banner
        distro="${2:-ubuntu}"

        if [[ "$distro" == "kali" ]]; then
            selected_image="$kali_image"
        elif [[ "$distro" == "ubuntu" ]]; then
            selected_image="$ubuntu_image"
        else
            printf "\033[31m[Error]\033[0m Invalid distro. Please use 'kali' or 'ubuntu'.\n"
            exit 1
        fi

        check_requirements
        printf "\033[1;33m[Working]\033[0m Starting $lab_name. . .\n"
        generate_compose_file "$selected_image"
        $DOCKER_COMPOSE_CMD -f "$compose_file" up -d
        if [ $? -eq 0 ]; then
            printf "\033[32m✔ $lab_name started.\033[0m\n"
        else
            printf "\033[31m✘ $lab_name failed to start.\033[0m\n"
            exit 1
        fi
        ;;
    -stop)
        show_banner
        if container_exists "$ot_container_name" || container_exists "$ews_container_name"; then
            check_requirements
            printf "\033[1;33m[Working]\033[0m Stopping $lab_name. . .\n"
            $DOCKER_COMPOSE_CMD -f "$compose_file" stop
            printf "\033[32m✔ $lab_name stopped.\033[0m\n"
        else
            printf "\033[34m[Information]\033[0m No containers to stop.\n"
            exit 1
        fi
        ;;
    -clean)
        show_banner
        if container_exists "$ot_container_name" || container_exists "$ews_container_name"; then
            check_requirements
            printf "\033[1;33m[Working]\033[0m Cleaning up all $lab_name resources. . .\n"
            $DOCKER_COMPOSE_CMD -f "$compose_file" down -v
            docker network rm "$lab_net" 2>/dev/null
            rm -f "$compose_file"
            printf "\033[32m✔ All $lab_name resources removed.\033[0m\n"
        else
             printf "\033[34m[Information]\033[0m No containers found to clean.\n"
             exit 1
        fi
        ;;
    -run)
        show_banner
        if container_exists "$ews_container_name"; then
            check_requirements
            printf "\033[1;33m[Working]\033[0m Accessing $ews_container_name terminal. . .\n"
            docker exec -it "$ews_container_name" bash
        else
            printf "\033[31m[Error]\033[0m Container $ews_container_name not found.\n"
            exit 1
        fi
        ;;
    -restart)
        show_banner
        check_requirements
        if [ ! -f "$compose_file" ]; then
            printf "\033[31m[Error]\033[0m Cannot restart: $compose_file not found.\n"
            exit 1
        fi

        printf "\033[1;33m[Working]\033[0m Restarting $lab_name. . .\n"
        $DOCKER_COMPOSE_CMD -f "$compose_file" up -d
        if [ $? -eq 0 ]; then
            printf "\033[32m✔ $lab_name restarted.\033[0m\n"
        else
            printf "\033[31m✘ $lab_name failed to restart.\033[0m\n"
            exit 1
        fi
        ;;
    -status)
        show_banner
        check_requirements
        $DOCKER_COMPOSE_CMD -f "$compose_file" ps
        ;;
    *)
        show_banner
        echo "Usage: $0 -start [kali|ubuntu] | -stop | -clean | -run | -restart | -status"
        echo ""
        echo "  -start     Start the $lab_name environment using the specified distro (default: ubuntu)"
        echo "             Valid options: kali (rolling) or ubuntu (22.04)"
        echo "  -run       Open a terminal inside the $ews_container_name container"
        echo "  -clean     Remove containers, volumes, and network"
        echo "  -stop      Stop all containers"
        echo "  -restart   Restart previously stopped containers"
        echo "  -status    Show current containers status"
        exit 1
        ;;
esac
📝 RESOLUTION OFFLINE (view content) ▼

      
#!/bin/bash

lab_name="OTLab03"
compose_file="${lab_name}.yml"

ot_container_name="gas-station"
ews_container_name="otlab-student"
kali_image="ews-image-kali01"
ubuntu_image="ews-image-ubuntu01"

lab_net="gas-station-net"

# ----------------------------------------
# Function to display the banner
show_banner() {                       
    printf "\033[1;33m" # Yellow and bold
    echo " _____ _____ __        _   "
    echo "|     |_   _|  |   ___| |_ "
    echo "|  |  | | | |  |__| .'| . |"
    echo "|_____| |_| |_____|__,|___|"
    printf "\033[1;37m" # White and bold
    printf "Exercise:  03-Emulation of a Gas Station Control System\n"
    printf "Version:   1.1-Offline\n"
    printf "Author:    substationworm\n"
    printf "Contact:   in/lffreitas-gutierres\n"
    printf "\033[0m" # Reset all styles
    echo ""
}

# ----------------------------------------
# Function to generate Docker Compose file
generate_compose_file() {
    local ews_image="$1"

    cat > "$compose_file" <<EOF
services:
  $ot_container_name:
    image: honeynet/conpot:latest
    container_name: $ot_container_name
    hostname: $ot_container_name
    mac_address: 00:A0:F6:12:B0:FF
    networks:
      $lab_net:
        ipv4_address: 10.1.0.23
    cap_add:
      - NET_ADMIN
      - NET_RAW
    privileged: true
    command: ["/home/conpot/.local/bin/conpot", "-f", "--template", "guardian_ast"]

  $ews_container_name:
    image: $ews_image
    container_name: $ews_container_name
    hostname: $ews_container_name
    networks:
      $lab_net:
        ipv4_address: 10.1.0.14
    privileged: true

networks:
  $lab_net:
    name: $lab_net
    driver: bridge
    ipam:
      config:
        - subnet: 10.1.0.0/24
EOF
}

# ----------------------------------------
# System requirements check
check_requirements() {
    error_flag=0

    if ! command -v docker >/dev/null 2>&1; then
        printf "\033[31m[Error]\033[0m Docker is not installed on this system.\n"
        error_flag=1
    elif ! docker info >/dev/null 2>&1; then
        printf "\033[31m[Error]\033[0m Docker is installed, but not accessible.\n"
        error_flag=1
    fi

    if command -v docker-compose >/dev/null 2>&1; then
        DOCKER_COMPOSE_CMD="docker-compose"
    elif docker compose version >/dev/null 2>&1; then
        DOCKER_COMPOSE_CMD="docker compose"
    else
        printf "\033[31m[Error]\033[0m Docker Compose is not installed.\n"
        error_flag=1
    fi

    if [ "$error_flag" -eq 1 ]; then
        printf "\033[31m✘ The $lab_name system requirements check failed.\033[0m\n"
        exit 1
    fi
}

# ----------------------------------------
# Function to check if a container exists
container_exists() {
    docker ps -a --format '{{.Names}}' | grep -q "$1"
}

# ----------------------------------------
# Command handling
case "$1" in
    -start)
        show_banner
        distro="${2:-ubuntu}"

        if [[ "$distro" == "kali" ]]; then
            selected_image="$kali_image"
        elif [[ "$distro" == "ubuntu" ]]; then
            selected_image="$ubuntu_image"
        else
            printf "\033[31m[Error]\033[0m Invalid distro. Please use 'kali' or 'ubuntu'.\n"
            exit 1
        fi

        check_requirements
        printf "\033[1;33m[Working]\033[0m Starting $lab_name. . .\n"
        generate_compose_file "$selected_image"
        $DOCKER_COMPOSE_CMD -f "$compose_file" up -d
        if [ $? -eq 0 ]; then
            printf "\033[32m✔ $lab_name started.\033[0m\n"
        else
            printf "\033[31m✘ $lab_name failed to start.\033[0m\n"
            exit 1
        fi
        ;;
    -stop)
        show_banner
        if container_exists "$ot_container_name" || container_exists "$ews_container_name"; then
            check_requirements
            printf "\033[1;33m[Working]\033[0m Stopping $lab_name. . .\n"
            $DOCKER_COMPOSE_CMD -f "$compose_file" stop
            printf "\033[32m✔ $lab_name stopped.\033[0m\n"
        else
            printf "\033[34m[Information]\033[0m No containers to stop.\n"
            exit 1
        fi
        ;;
    -clean)
        show_banner
        if container_exists "$ot_container_name" || container_exists "$ews_container_name"; then
            check_requirements
            printf "\033[1;33m[Working]\033[0m Cleaning up all $lab_name resources. . .\n"
            $DOCKER_COMPOSE_CMD -f "$compose_file" down -v
            docker network rm "$lab_net" 2>/dev/null
            rm -f "$compose_file"
            printf "\033[32m✔ All $lab_name resources removed.\033[0m\n"
        else
             printf "\033[34m[Information]\033[0m No containers found to clean.\n"
             exit 1
        fi
        ;;
    -run)
        show_banner
        if container_exists "$ews_container_name"; then
            check_requirements
            printf "\033[1;33m[Working]\033[0m Accessing $ews_container_name terminal. . .\n"
            docker exec -it "$ews_container_name" bash
        else
            printf "\033[31m[Error]\033[0m Container $ews_container_name not found.\n"
            exit 1
        fi
        ;;
    -restart)
        show_banner
        check_requirements
        if [ ! -f "$compose_file" ]; then
            printf "\033[31m[Error]\033[0m Cannot restart: $compose_file not found.\n"
            exit 1
        fi

        printf "\033[1;33m[Working]\033[0m Restarting $lab_name. . .\n"
        $DOCKER_COMPOSE_CMD -f "$compose_file" up -d
        if [ $? -eq 0 ]; then
            printf "\033[32m✔ $lab_name restarted.\033[0m\n"
        else
            printf "\033[31m✘ $lab_name failed to restart.\033[0m\n"
            exit 1
        fi
        ;;
    -status)
        show_banner
        check_requirements
        $DOCKER_COMPOSE_CMD -f "$compose_file" ps
        ;;
    *)
        show_banner
        echo "Usage: $0 -start [kali|ubuntu] | -stop | -clean | -run | -restart | -status"
        echo ""
        echo "  -start     Start the $lab_name environment using the specified distro (default: ubuntu)"
        echo "             Valid options: kali (rolling) or ubuntu (22.04)"
        echo "  -run       Open a terminal inside the $ews_container_name container"
        echo "  -clean     Remove containers, volumes, and network"
        echo "  -stop      Stop all containers"
        echo "  -restart   Restart previously stopped containers"
        echo "  -status    Show current containers status"
        echo ""
        echo "[i] Local images required: ews-image-kali01 and ews-image-ubuntu01"
        exit 1
        ;;
esac